Touchstone 2
The Touchstone 2 coating thickness gauge uses the magnetic properties of the substrate material to determine the coating thickness i.e. the distance the sensor face is held off the steel by the coating. The TOUCHSTONE 2 hall effect sensor will measure a wide range of non-magnetic coatings on ferrous substrates including; paint, plastic stainless steel, galvanised zinc, aluminium and tin.
Touchstone 2 features:
- Highly accurate hall effect sensor
- Measures any non-ferrous coating
- Measures up to 8mm of coatings
- Simple calibration and operation
The Touchstone 2 can be used in:
- Civil engineering
- Petro-chemical
- Offshore
- Automotive
| Touchstone 2 Specification: | |
| Coating range: | 0-8mm, 0-0.313 inches |
| Applications: | Any non-ferrous coating on a ferrous material. |
| Temperature range: | -10ºC to +40ºC |
| Units of Measurement: | Switchable between microns and thousandths of an inch |
| Resolution: | 10 microns |
| Accuracy: | ±10microns up to 1mm then 1.5% |
| Display: | 12.5mm high 3½ LCD Display with micron/thou indicator. Low battery indicator |
| Auto shut off: | After 3 minutes inactivity. |
| Battery life: | 40 hours nominal with a PP3 6F22 alkaline battery |
| Dimensions: | 145mm high x 80mm wide x 40mm deep (max.) |
| Weight: | 150g |